BP Solar SX 375J, Solar Panel, 75 Watt, 12 Volt, Pallet of 50
Per Watt - $4.86

J = Clear universal frame and standard J-Box

Detailed Description:

Solar electric modules convert the sun's energy into direct current (DC) electricity. BP Solar Home Solutions® systems use high performance monocrystalline or multicrystalline modules, also called solar panels.

BP Solar modules can be securely mounted to almost any kind of roof – flat or sloped – with just about any type of roofing material, including slate, metal, Spanish tile, asphalt and shake shingles.


High-efficiency photovoltaic module using silicon nitride multicrystalline silicon cells.

Performance
Rated Power: 75 watts
Power Tolerance: +-5%
Nominal Voltage: 12 volts
Warranty: 25 years

Configuration
J BP 375J Clear Universal frame and standard J-Box
L BP 375L Unframed laminate version of BP 375S
S BP 375S Clear Universal frame with Wirehold^TM J-Box and and polarized Multicontact (MC) connectors

Electrical Characteristics:
Maximum Power (Pmax): 75 Watts
Voltage at Pmax (Vmp): 17.3 Volts
Current at Pmax (Imp): 4.3 Amps
Warranted minimum Pmax: 71.3 Watts
Short-circuit Current (Isc): 4.7 Amps
Open-circuit Voltage: 21.8 Volts
Temperature coefficient of Isc: (0.065+-0.015)%/K
Temperature coefficient of Voc: -(80+-10)mV/K
Temperature coefficient of Power: -(0.5+-0.05)%/K
NOCT (Air 20C, Sun 0.8kW/m², wind speed 1m/s: 47+-2C
Maximum series fuse rating: 15 amp (375S 375L) / 20 amps (BP 375J)
Maximum system voltage: 600 V (US NEC), 1000V (TUV Rheinland & IEC 61215)

Mechanical Characteristics

• S,L,J Solar Cells : 36 cells (125 x 125 mm) in a 4 x 9 matrix connected in series
• S,L Output cables : RHW AWG #12 (3.3 mm²) cable with polarized weatherproof DC rated Multicontact connectors; asymmetrical lengths -900mm (-) and 800mm (+)
• J Junction box: J-Version junction box with 6 terminal connection block; IP 65, accepts PG 13.5, M20, 1/2" conduit, or cable fittings accepting 6 to 12 mm diameter cable. Terminals accept 8 to 14 AWG² (2.5 to 10 mm) wire.
• S,J,L Diodes IntegraBus^TM technology includes Schottky by-pass diodes integrated into the printed circuit bus.
• S,L,J Construction: Front: High transmission 1/8" (3 mm) tempered glass. Back: White back sheet; Encapsulated: EVA.
• S,J Frame: Clear anodized aluminum alloy type 6063T6. Silver universal frame.

Quality and Safety

• Manufactured in ISO 9001 certified factories; conforms to European Community Directive 89/33/EEC, 73/23/EEC, 93/68/EEC; certified to IEC 61215
• Module power measurements calibrated to World Radiometric Reference through ESTI (European Solar Test Installation at Ispra, Italy)
• Framed modules certified by TUV Rheinland as Safety Class II (IEC 60364) equipment for use in systems up to 1000 VDC
• Framed modules listed by Underwriter Laboratories for electrical and fire safety (Class C fire rating)
• Approved by Factory Mutual Research in NEC Class 1, Division 2, Groups C & D hazardous locations (J version only)

Qualifications Test Parameters
Temperature cycling range: 40F to 185F (-40C to 85C)
Humidity freeze, damp heat: 85% RH
Static load front and back (e.g. wind): 50 psf (2400 Pa)
Front loading (e.g. snow): 113 psf (5400 Pa)
Hailstone impact: 1" (25 mm) hail at 52 mph (23 m/s)

S,J
Dimensions (LWD): 47.60" x 21.14" x 1.97" (1209 x 537 x 50 mm)
Weight: 16.94 lbs (7.7 kg)
L
Dimensions (375L) (LWD): 47.1" x 20.9" x 0.75" (1197 x 530 x 19 mm)
Weight: 13.4 lbs (6.1 kg)